| Material: | HIPS |
|---|---|
| Kind: | White Plastic Sheet |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | 2.0%~5.0% |
| Tensile Strength: | 3.46MPa |
| Transport Package: | Pallet |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The main classification of blister products
1. If classified according to the thickness of the material, it can be divided into
A. The thickness of ordinary thin blister is 0.14~5.0mm-mainly made of various materials and effects such as PVC, PP, PS (HIPS), PET (including APET and PETG), PE, BOPS and recyclable paper trays Folding, half-folding, three-folding, cylinder, folding box, heaven and earth box, high frequency and other non-thermoformed blister products are widely used in food, medicine, electronics, toys, computers, daily necessities, cosmetics, machinery hardware and other industries.
B. The thickness of the special thick blister is 0.14~5.0mm-mainly the plastic injection products with various materials and effects such as PVC, PP, PS (HIPS), PET), ABS, PC, PE, etc.
The reason for not classifying the types of materials is mainly considering that there are some differences between the materials used in ordinary thin blister and special thick blister, but PVC, PP, PS and PET are all in these two types of blister products. To have a role to play!
PVC hard film has moderate toughness and is not easy to burn. It will produce chlorine when burned, which will affect the environment. PVC is easy to heat and can be sealed with a sealing machine and high-frequency machine. It is the main raw material for producing transparent plastic products.
PS hard film has low density, poor toughness, and is easy to burn. It will produce styrene gas (a harmful gas) when burned, so it is generally used to produce various industrial blister trays.
PET hard film has good toughness, high transparency, easy to burn, and does not produce harmful gas when burned. It is an environmentally friendly material, but the price is high, and it is suitable for high-end blister products. The blister blister of European and American countries generally requires PET hard film, but It is not easy to heat seal, which brings great difficulties to packaging. In order to solve this problem, people compound a layer of PVC film on the surface of PET, named PETG rigid sheet, but the price is higher.
PC films are available in wide variety of surface textures,including glass-clear with both sides gloss. These films offer high light transmittance, excellent surface uniformity and ease of processing. All films use bayer markrolon polycarbonate resin.Most have the necessary UL ratings.
| Structure Type | Hot-Dip Galvanized Steel Structure |
| Wind Load | 0.5 KN/M2 |
| SnowLoad | 0.4 KN/M2 |
| Max Tonnage | 150/M3/H |
Anti-scratch Protective Polycarbonate Sheet for IT Electronic Product:
1) Impact strength: 850J/m.The impact resistance of polycarbonate solid sheet is about 200 times of common glass,20 times of acrylic sheets.
2) Light weight: polycarbopnate film is About 1/2 times of glass
3) Transmission: good light transmission of PC Film(clear color)80%--90% for different thickness
4) Wide service temperature range: -40°Cto 120°C,good weather resistance and UV protection
5) Specific gravity: 1.2 g/cm
6) Coefficient of thermal expansion: 0.065 mm/m°C
7) Tensile strength: >60N/mm2
8) Flexural strength: 100N/mm2
9) Modulus of elasticity: 2,400mPa
10) Tensile street at break: >65mPa
11) Elongation at break: >100%
12) Specific heat: 1.16J/kgk
13) Heat deflection temperature: 140°C
14) Heat conductivity: 2.3-3.9 W/m2°C
FAQ
Q1. Are you factory or Trade Company?
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}