| Customization: | Available |
|---|---|
| After-sales Service: | Service |
| Material: | Polycarbonate Sheet |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Common plastic sheet:
Commonly used sheet include: PVC, PET, PP, PS and on the basis of flocking sheet, gold sheet and anti-static sheet.
PVC: the most commonly used plastic material, soft, strong toughness, good plasticity, can be made transparent and various colors, commonly used transparent PVC packaging electronics, cosmetics, toys, gifts and other products.
PET (A-PET) : hard quality, good toughness, high strength, bright surface, environmental protection, non-toxic, transparent and A variety of color sheet.The disadvantage is that PET high-frequency thermal bonding is more difficult, the price is much more expensive than PVC, this material is often required to replace PVC products of high-grade and environmental protection users;
PS: density is small (light), environmental protection non-toxic, plasticity is very good, poor toughness brittle, can not be made of bright materials, so can only be made of bottom type plastic, because it is easy to crack, this kind of plastic should not be recycled;
PP: special soft material, good toughness, environmental protection, non-toxic, high temperature resistance, is often made of food and beverage appliances or other high temperature resistant products packaging;But its plasticity is poor, processing is difficult, the surface gloss is poor, and the color will become lighter when processing;
PET-G: the physical properties of the same as A-PET, but can be high frequency thermal bonding, the price of A-PET is 80% more expensive
Thickness classification of materials:
A, ordinary thin blister thickness of 0.14 ~ 5.0 mm - mainly use PVC, PP, PS (HIPS), PET (including APET, PETG), PE, BOPS, and recycled paper such as the effect of various materials and folding, folded in half, thirty percent, cylinder, folding box, box, high frequency and other non thermal forming blister products, widely used in food, medicine, electronics, toys, computers, daily necessities, cosmetics and mechanical hardware industry, etc.
B, special thick blister thickness of 0.14 ~ 8.0 mm - mainly use PVC, PP, PS (HIPS), PET (including APET, PETG), PE, ABS, PC and PMMA, etc all kinds of material and the effect of injection molding type blister products, the main products are refrigerator inner, advertising light boxes, product display, PET cage, chassis, after the rear projection TV shell, and a variety of mechanical panels, etc., can replace plastic injection products, low mould cost (only 1/20 of the injection mold), short production cycle, mould development time is short, generally only 3 ~ 5 days), etc
The reason not on the type of materials to classify, mainly considering the ordinary thin plastic and special thick plastic materials used by some differences, but PVC, PP, PS and PET in these two kinds of plastic products have a place, can be called plastic products with the "four Kings"!
PVC hard piece toughness moderate, not easy to burn, combustion will produce gas, have a certain impact on the environment, PVC is easy to heat, can be used sealing machine and high frequency machine edge sealing, is the main raw material for the production of transparent plastic products.
PS hard piece density is low, toughness is poor, easy to burn, combustion will produce styrene gas (a harmful gas), so generally used to produce a variety of industrial blister tray.
PET plate good toughness, high transparency, easy burning, burning does not produce harmful gases, belong to the environmental protection material, but the price is high, suitable for high-end blister products, blister blister of European and American countries generally require the use of PET plate, but it is not easy to heat sealing, bring great difficulty to the package, in order to solve this problem, people on the PET surface composite layer of PVC film, named PETG plate, but the price higher.
PC films are available in wide variety of surface textures,including glass-clear with both sides gloss. These films offer high light transmittance, excellent surface uniformity and ease of processing. All films use bayer markrolon polycarbonate resin.Most have the necessary UL ratings.
| Structure Type | Hot-Dip Galvanized Steel Structure |
| Wind Load | 0.5 KN/M2 |
| SnowLoad | 0.4 KN/M2 |
| Max Tonnage | 150/M3/H |
Anti-scratch Protective Polycarbonate Sheet for IT Electronic Product:
1) Impact strength: 850J/m.The impact resistance of polycarbonate solid sheet is about 200 times of common glass,20 times of acrylic sheets.
2) Light weight: polycarbopnate film is About 1/2 times of glass
3) Transmission: good light transmission of PC Film(clear color)80%--90% for different thickness
4) Wide service temperature range: -40°Cto 120°C,good weather resistance and UV protection
5) Specific gravity: 1.2 g/cm
6) Coefficient of thermal expansion: 0.065 mm/m°C
7) Tensile strength: >60N/mm2
8) Flexural strength: 100N/mm2
9) Modulus of elasticity: 2,400mPa
10) Tensile street at break: >65mPa
11) Elongation at break: >100%
12) Specific heat: 1.16J/kgk
13) Heat deflection temperature: 140°C
14) Heat conductivity: 2.3-3.9 W/m2°C
FAQ
Q1. Are you factory or Trade Company?
){kind=link}