Orange Pharmaceutical PVC/Te/PVDC Composite Sheets for Light-Sensitive Products

• Material: PVC
• Type: Stretch Film
• Transparency: Transparent
• Hardness: Soft
• Molding method: Blow Molding
• Transport Package: PE Bag, Kraft Paper, Pallet
• Model NO.: PVC film
• Specification: Customized
• Trademark: TOP LEADER
• Origin: China
• Production Capacity: 5000tons /Month

Product Description

Product Description

Orange Pharmaceutical PVC/TE/PVDC composite sheets for blister, primary mackaging for light-sensitive products
Functions: blister plastic ,easy molding and Heat sealing
Characters: Our goods have good transparency ,less bubbles, veins, and good molding, can be heatsealed with PTP foil

PVC 200--300mic/ PVDC 40--120gsm;
TE layer provides higher flexibility compared to PE, suitable for hygroscopic products and for use in demanding climate zones

What is PVDC
PVC/PVDC duplex film has much better barrier properties, special against the moisture.
PVDC is polyvinylidene chloride, known for its excellent gas barrier properties against water, oxygen and many gases (aromas). 
It also has better corrosion resistance than PVC due to its higher chlorine content and is sometimes copolymerized with PVC to improve its performance.

PVDC is applied as an aqueous coating over the PVC rigid film; its weight is expressed in grams per square meter (gsm or g/m2). 
40gsm/ 60gsm/ 90gsm/ 120gsm are common. Its performances are in proportion to the weight of PVDC coating.

 

Physical property

Appearance: Flat, even and clean. No perforation. No peculiar. No odor No impurity. No conglutination,
Quantity of steam penetration: ≤0.5g/(m2.24h)
Quantity of oxygen penetration: ≤0.5cm3/(m2.24h.0.1Mpa)
Sealing strenghth : ≥7.5N/15MM
Water Vapour Transmission Rate & Oxygen Transmission Rate below 1.

Technical Date Sheet for other popular products: pvc layer for cold form alu alu

Width	thickness(Micron,Gram)			Core Size	Roll Length	Printing	Note
	OP	AL	VC(HSL)	76/152 mm	1000-2000 mm	Available	One side dull, Other side bright
60-600mm	Ig+/-0.5g	20-30	3g-8g
Packing	The roll is packing with PE pocket,plastic plug in two side and then packing by the carton and the pallets

special requirement  for printing ink
OP lacquer-1	OP lacquer-2	OP lacquer-3	OP lacquer-4
Solvent printing ink as acetic enter	UV  printing ink	Ethanol printing ink	Screen printing ink