High Density Polyethylene HDPE Plastic Sheet for Anti UV Resistant Protected Plastic

• Material: PE
• Type: Shrink Film
• Transparency: Opaque
• Hardness: Soft
• Molding method: Blow Molding
• Product Name: Anti UV HDPE Sheets
• Model NO.: TL-PE-122101
• Thickness: 1mm-200mm
• Size: 1000-2440mm
• Density: 0.96g/cm3
• Friction Coefficient: 0.3
• Heat Resistance (Continuous): 90ºC
• Heat Resistance (Short-Term): 110ºC
• Sample: Free
• Transport Package: Pallet
• Trademark: TL
• Origin: Zibo, Shandong, China
• HS Code: 3920109090
• Production Capacity: 500t/Month

Product Description

Product Description

 

Model No.:
HDPE-2
Brand Name:
TL
Material:
PE
hardness:
Rigid
Processing technology:
Injection Molding
transparency:
Transparent
place of origin:
China

Supply Ability & Additional Information

Place of Origin:
CHINA
Productivity:
500 tons per month
Payment Type:
T/T,L/C,Paypal,Money Gram,Western Union
Incoterm:
CFR,CIF,EXW,FCA,CPT
Certificate:
SGS,GB
Transportation:
Ocean,Land,Air
Port:
QINGDAO,SHANGHAI,TIANJIN

Specification:

Type	extruded
Size	1000*2000mm or 1220*2440mm
Thickness	1---200mm
Density	0.96 g/cm³
Color	White / black / blue / green / yellow
Brand name	AHD
Material	100% virgin material
Sample	FREE
Acid resistance	YES
Ketone Resistance	YES

 

Physical Datasheet:

Item	HDPE
Color	White / Black / Green
Proportion	0.96g/cm³
Heat resistance (continuous)	90ºC
Heat resistance (short-term)	110
Melting point	120ºC
Glass transition temperature	_
Linear thermal expansion coefficient  (average 23~100ºC)	155×10^-6m/(m.k)
Flammability(UI94)	HB
(Dipping into water at 23ºC	0.0001
Bending tensile stress/ Tensile stress off shock	30/-Mpa
Tensile modulus of elasticity	900MPa
Compressive stress of normal strain-1%/2%	3/-MPa
Friction coefficient	0.3
Rockwell hardness	62
Dielectric strength	>50
Volume resistance	≥10 ^15Ω×cm
Surface resistance	≥10 ^16Ω
Relative dielectric constant-100HZ/1MHz	2.4/-
Bonding capacity	0
Food contact	+
Acid resistance	+
Alkali resistance	+
Carbonated water resistance	+
Aromatic compound resistance	0
Ketone resistance	+

  

HDPE plastic is polyethylene plastic, has corrosion resistance, electrical insulation (especially high frequency insulation), low pressure polyethylene is suitable for the production of corrosion resistant parts and insulating parts; High pressure polyethylene is suitable for film production, etc. Uhmwpe is suitable for shock absorption, wear resistance and transmission parts.

Usage:

Can use injection molding, extrusion, blow molding and other processing methods. Mainly used for agricultural film, industrial packaging film, medicine and food packaging film, machinery parts, daily necessities, building materials, wire, cable insulation, coating and synthetic paper.

HDPE performance:

1. Crystal material, small moisture absorption, no need to fully dry, excellent fluidity, fluidity sensitive to pressure, molding time with high pressure injection, uniform material temperature, fast filling speed, full pressure. Direct gate should not be used to prevent uneven shrinkage and increase of internal stress. Pay attention to the location of the gate to prevent shrinkage and deformation.

. Large shrinkage range and shrinkage value, obvious direction, easy deformation warping. The cooling speed should be slow, the mold is equipped with cold hole, and a cooling system.

3.Heating time should not be too long, otherwise it will decompose and burn.

4.Soft plastic parts have shallow side grooves, can be forced to demolom.

5.It is not suitable to contact with organic solvent to prevent cracking.